GB3PT Repeater

Introduction

GB3PF is a 70cm FM repeater in Prescot, Merseyside. The NOV holder is M0NFI.

It transmits on 430.8625MHz, has a +7.6MHz split with a CTCSS access tone of 94.8Hz.

Please ensure your radio is set to FM narrow deviation 2.5KHz 

Link to GB3PT on qrz.com

 

Operating

Please leave a gap of four seconds between overs to allow all linked nodes to reset and for anyone else to join in. Without pauses, nodes on the network can time out.

GB3PT is permanently connected to the HUBNet network.

Repeater Tones

Several tones are used by the repeater to indicate its operational states. 

When you transmit into the repeater and it's connected to another node, as you unkey, the gateway will reply with a morse K (dah-dit-dah) with a higher frequency of 1200Hz.

When you transmit into the repeater and it isn't connected to another node, as you unkey, the gateway will reply with a morse K (dah-dit-dah) with a lower frequency of 800Hz.

When a remote user on the network ends transmission you will hear a morse I ( dit-dit).

 

License Details

Callsign GB3PT
Transmitter Frequency 430.8625 MHz
Receiver Frequency 438.4625 MHz
CTCSS Frequency 94.8 Hz
Modes FM Narrow 2.5KHz peak
Antenna Polarisation Vertical
Antenna Height Above Ground 12m
Maximum Transmitter Power PEP 9 dBW, 8W

 

Loading...