GB3PF Repeater

Introduction

GB3PF is a 70cm FM repeater in Nelson, Lancashire. The NOV holder is M0NFI.

It transmits on 433.0MHz, has a +1.6MHz split with a CTCSS access tone of 82.5Hz.

Link to GB3PF on qrz.com

Operating

GB3PF is permanently connected to the HUBNet network. Please leave a gap of four seconds between overs to allow all linked nodes to reset and for anyone else to join in. Without pauses, nodes on the network can time out.

 

Repeater Tones

Several tones are used by the repeater to indicate its operational states. 

When you transmit into the repeater and it's connected to another node, as you unkey, the gateway will reply with a morse K (dah-dit-dah) with a higher frequency of 1200Hz.

When you transmit into the repeater and it isn't connected to another node, as you unkey, the gateway will reply with a morse K (dah-dit-dah) with a lower frequency of 800Hz.

When a remote user on the network ends transmission you will hear a morse I ( dit-dit).

 

License Details

Callsign GB3PF
Transmitter Frequency 433.000 MHz
Receiver Frequency 434.600 MHz
CTCSS Frequency 82.5 Hz
Modes FM Narrow 2.5KHz peak
Antenna Polarisation Vertical
Antenna Height Above Ground 10m
Maximum Transmitter Power PEP 11 dBW, 12.5W

Loading...