Repeater/Gateway Tones Have Changed

This morning I've changed the courtesy tones on the repeater and gateways to match other HUBNet repeaters.

When you transmit into the repeater/gateway and it's connected to another node, as you unkey, the gateway will reply with a morse K (dah-dit-dah) with a higher frequency of 1200Hz.

When you transmit into the repeater/gateway and it isn't connected to another node, as you unkey, the gateway will reply with a morse K (dah-dit-dah) with a lower frequency of 800Hz.

When a remote user on the network ends transmission you will hear a morse I ( dit-dit).